Alcatel 7670 RSP
Routing Switch Platform | Release 6.2
A multiservice IP routing and switching platform
supporting new and established services
The Alcatel 7670 Routing Switch Platform
(RSP) is a feature-rich, highly scalable,
multiservice platform optimized to deliver
IP/MPLS and ATM-based services reliably
As a highly reliable, carrier-grade plat-
form, the Alcatel 7670 RSP provides full
common equipment redundancy. Facility
protection capabilities include automatic
and concurrently. The platform is ideal for protection switching (APS) for SONET/
service providers seeking to preserve and
expand current services while transition-
ing towards an IP/MPLS infrastructure.
With separate control planes for
IP/MPLS and ATM, the Alcatel 7670 RSP
has been uniquely designed to support a
wide range of services including IP-VPNs,
Layer 2 VPNs, Ethernet, ATM, and frame
relay. The Alcatel 7670 RSP also offers
SDH interfaces and link aggregation group
(LAG) for Ethernet interfaces. With the
addition of MPLS fast reroute (FRR),
non-stop routing, non-stop signaling and
non-stop forwarding, the result is a high-
availability architecture at all levels pro-
viding the foundation for true end-to-end,
non-stop Layer 2 and Layer 3 services.
The industry-leading Alcatel 5620
comprehensive network and service inter- Network Manager (NM) provides a single
working capabilities leveraging standards-
based approaches over both MPLS and
ATM. Furthermore, the Alcatel 7670 RSP
supports high-density, channelized, multi-
management platform to seamlessly manage
both legacy and IP/MPLS services. Only
Alcatel can provide a single tool for auto-
mated end-to-end provisioning of both label
service cards that offer outstanding flexibility switched paths (LSPs) and VCs across
with the ability to support multiple concur-
rent services at different speeds on a
single card.
multiple platforms, monitoring and enforce-
ment of service level agreements (SLAs),
and open interfaces that enable simple
Designed to accommodate traffic growth, integration into any OSS environment.
the Alcatel 7670 RSP scales rapidly and
without service interruption from 50 Gb/s
to 450 Gb/s (full duplex, redundant). The
The Alcatel 7670 RSP is deployed in
over 110 of the world’s largest fixed and
mobile service provider networks world-
breadth of supported configurations ensures wide. Its unique platform enables the
optimal node deployments at multiple
sites of varying size.
deployment of flexible, scalable, highly
reliable and manageable networks capable
of supporting both today’s requirements
and tomorrow’s evolution.
This document, which refers to Alcatel, was issued prior to our merger.
It has not been modified to refer to Alcatel-Lucent since it is part of our archives.
Alcatel 7670 RSP | Release 6.2
Switching shelf (SS)
MPLS Features
> Logical multicast
> Point-and-click provisioning
> Fabric scales to 450 Gb/s
(full duplex) providing 320 Gb/s
user I/O (full duplex)
> Enables 14 additional PSs to be
added (15 in total)
> LER and LSR
> Generic label (“shim header”) and
label control ATM (VPI/VCI)
> LSP signaling, RSVP-TE, LDP DoD,
LDP-DU and CR-LDP
¬ explicit route reservation
(and alternate explicit route)
¬ resource reservation
> Non-stop MPLS signaling, LDP graceful
restart
> Dynamic LSP and provisioned/static LSP
> CSPF for RSVP-TE
> LSP tunnels (BGP and IGP shortcuts)
> End-to-end LSP protection (FRR)
> Multiple parallel LSPs
> S-PVC hitless connection moves
> Test access connections
> ILMI address registration
> ATM Forum PNNI path and
connection trace
> Closed user groups
> Address screening and address
translation
> Efficient support of real-time traffic
(CBR and rt-VBR)
> Explicit rate and virtual source/
virtual destination support for ABR
> Virtual path aggregation
> OA&M performance monitoring
> OA&M round trip delay
> Centralized alarm management with
audible and visual alarm notification
> Centralized software management
administration
> Router configuration templates
> Dynamic routing protocol configuration
> IP diagnostics (ping and traceroute)
> Automatic discovery of equipment
additions, deletions and changes
> Sophisticated link and path management
> Extensive performance data for SLAs
and billing capabilities based on
AMA records
> Multiple graphical displays of
performance data
Edge services extender shelf (ESE)
> Extends Alcatel 7670 RSP multiprotocol
capabilities to low-speed, multiservice
interfaces
> Subtended from PS via standard ATM
NNI STM-4/OC-12c or STM-1/OC-3c
interface
> Also deployable as a standalone
3.2 Gb/s multiservice switch
> 12 universal, multiservice slots,
each supporting channelized and
unchannelized interfaces up to
STM-1/OC-3
> Open interfaces at network and service
levels for maximum business automation
> SNMP support
> Hitless “make before break”
LSP modification
> Directed ping and traceroute over MPLS
> LSP ping and traceroute
System Reliability
and Redundancy
> Hitless software upgrades
> two high-speed slots for STM-4/OC-12c
or multiport STM-1/OC-3c
¬ MIB II as per RFC 1213
¬ interface table MIB as per RFC 1573
¬ SONET MIB as per RFC 1595
¬ DS-3/E3 MIB as per RFC 1407
¬ ATM interface MIB as per RFC 1695
¬ ILMI MIB as per ATM Forum UNI v3.1
¬ enterprise MIB for PVC and S-PVC
setup
¬ frame relay services MIB
¬ call routing statistics MIB
¬ IPv6 MIB
> Hardware redundancy: common control,
data plane fabric, control plane fabric
(separate from data), line and I/O
cards, power, cooling, synchronization
and management
> Control redundancy: 1+1 redundant
call processing, billing, routing, network
data collection and node control
> Non-stop routing for BGP, OSPF and IS-IS
> Non-stop RSVP-TE signaling
> Hot standby for PNNI routing and
signaling
> Non-stop IMA
> APS
> IEEE 802.3ad link aggregation
on GigE line card with LACP
> F1- to F5-level OA&M functions
> Circuit, equipment and line loopbacks
> ATM/MPLS mediation
> IPv6 tunneling over MPLS (6PE)
> Source-based forwarding to MPLS LSPs
> Network layer OA&M: MPLS ping
and traceroute
> Service layer OA&M: PW VCCV
Interfaces
Any service, any port
> Concurrent POS and ATM channels within
OC-48/STM-16 and OC-12/STM-4
interfaces (channelized to STS-1/DS-3)
> IP forwarding, MPLS and ATM switch-
ing supported in ATM channels
> IP forwarding, MPLS and ATM
mediation supported in POS
channels
> Bridged and Routed Encapsulation
(RFC 2684)
ATM Features and Performance
> CBR, 2 x rt-VBR, 3 x nrt-VBR,
ABR and UBR with MDCR (UBR+)
> As per Telcordia GR-1110-CORE,
GR-1248-CORE, ATM Forum TM4.0
and ITU-T I.371; VS/VD and full ABR
as per ATM Forum TM4.0, including
ER marking
> PNNI, AINI, B-ICI v.2.0, ILMI 4.0,
UNI 3.1, UNI 4.0, Q.2931 and
Q.2961 signaling
> UNI services from DS-1 through
OC-48/STM-16
> 3,000 SVC calls per second (sustained)
– equivalent to 10 million BHCAs
> 768,000 connections
> Signaling congestion control
> ATM Forum policy-based routing
> PNNI QoS routing
> PNNI-H (hierarchy)
> NCCI
Scalable Architecture
In-service system expansion
> Short-, intermediate- and long-reach
optics
> Switching fabric scales from 50 Gb/s
to 450 Gb/s (full duplex, redundant,
APS enabled)
> Single nodal entity (i.e., one logical
management interface)
> Parallel, redundant optics used to
interconnect shelves, integrated
on common control
Gigabit Ethernet
> Per VLAN configuration for access
to Layer 3 service or as an endpoint
to Layer 2 service
> Layer 2 network interworking with
Ethernet over ATM, Ethernet over MPLS
> Layer 2 service interworking: Ethernet
VLAN to frame relay/ATM VC
> Short-, intermediate- and long-reach
optics
> Background and directed diagnostics
for fault isolation
> Performance monitoring with threshold
crossing alerts
Peripheral shelf (PS)
> EAC
> Single PS can be deployed as a stand-
alone 50 Gb/s Alcatel 7670 RSP system
> 14 universal, multiprotocol IP/MPLS/
ATM slots, each supporting 2.4 Gb/s
user I/O, per PS
> Mid-plane design enables combinations
of different optical I/O per line card
> Optimized per-PS configuration enables
APS in all slots with zero fabric con-
sumption for redundant cards
> Alarm logs and remote alarm signaling
> Operational and diagnostic LED displays
> Network inventory support from
Alcatel 5620 NM
Low speed, multiservice
> ATM IMA v1.1 and v1.0
> Frame relay and MLFR
> Circuit emulation: private line,
TDM over packet
Network Management
> SVCs and SVPs
> S-PVCs and S-PVPs
> S-PVC operator-directed routing
> Point-to-point and point-to-multipoint
PVCs, SVCs and S-PVCs
> Management of VPs, VCs, LSPs and
IP service interfaces through Alcatel
5620 NM, or local management
interface (i.e., CLI)
> Voice over packet (AAL2)
> 10/100 Ethernet
AL CAT E L >
3
Alcatel 7670 RSP | Release 6.2
Physical Dimensions
Power
> DC power: -48 V to -60 V DC
> -60 m to 1,800 m (-197 ft. to
5,905 ft.) above sea level
Telecom
> Telcordia (Bellcore) TR-NWT-1112
(Multimode)
> ITU G.957 (Optical STM-N)
> Telcordia (Bellcore) TR-NWT-000499
(DS-N)
> AT&T Pub 62411 (DS-1)
> ITU G.703 (T1/E1/155 Mb/s)
> ITU G.707 (Synchronization Status)
Network Node Interface for Synchronous
Digital Hierarchy
> ITU G.825 Jitter/Wander, Digital Net-
works for Synchronous Digital Hierarchy
> Telcordia GR-253-CORE Issue 3
(Section 4: Physical Layer)
> Telcordia GR-253-CORE Issue 3
(Section 5.4 and 5.6: Network ITU-T
G.703 Physical Electrical Interfaces
Requirements)
> ITU-T G.707 (SDH Mapping and
Overhead Requirements)
> ITU-T G.813 (Network Synchronization
Option 1(E rate))
> ITU-T G.823 (E-rate Jitter/Wander)
> ITU-T G.824 (T-rate Jitter/Wander)
> ITU-T G.825 (SDH Jitter/Wander)
> ITU-T G.957 (IR/LR/XLR)
> ANSI T1.403 (DS-1 Physical Layer)
> ANSI T1.404 (DS-3 Physical Layer)
> ANSI T1.102 (STM-1e)
Peripheral shelf
> Height: 93.3 cm (36.7 in.)
> Width: 54.5 cm (21.4 in.)
> Depth: 54.5 cm (21.4 in.) without
cables; 60 cm (23.6 in.) with cables
Industry-Specific
Requirements
Switching shelf
> ANSI T1.105.06
> Height: 97.7 cm (38.4 in.)
> Width: 54.5 cm (21.4 in.)
> Depth: 54.5 cm (21.4 in.) without
cables; 60 cm (23.6 in.) with cables
Telcordia (Bellcore)
> TR-NWT-000332
> GR-78-CORE
> GR-63-CORE
> GR-1089-CORE
The Alcatel 7670 RSP also supports
customer-specific qualification
requirements.
Edge services extender shelf
> Height: 92.0 cm (36.7 in.)
> Width: 44.0 cm (17.3 in.)
> Depth: 31.0 cm (12.2 in.) without
cables; 39.0 cm (15.5 in.) with cables
ETSI
> ETS 300 019
> ETS 300 132-2
Normal Operating Environment
> -5 C to +40 C (23 F to 104 F)
> 5% to 85% relative humidity,
non-condensing
Qualification Summary
North and South America
Product Safety Approvals
CSA 60950-1
Europe, Middle East, Africa
Asia, Pacific
European Community
IEC 60950-1
UL 60950-1
EN 60950-1
IEC 60825-1, -2
FDA/CDRH 21 CFR Part 1040
EMC Approvals
EN 60825-1, -2
AS/NZS 3260 and TS001
ICES-003 Class A
European Community
EN 55022 Class A
CISPR 22 Class A
AS/NZS 3548 Class A
MIC Notice no. 2001-115
MIC Notice no. 2001-116
FCC Part 15 Class A
ETS 300 386 Class B
Network Attachment Approvals
IC CS-03
JATE Digital Services (Green Book)
AS/ACIF S016
ACTA TIA/EIA/IS-968 (formerly FCC Part 68)
MIC Proclamation No: 1998-62
MIC Proclamation No: 1998-18
MIC Notice no. 2001-03
Alcatel, Lucent, Alcatel-Lucent, the Alcatel-Lucent logo, are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. Alcatel-Lucent assumes no responsibility
for the accuracy of the information presented, which is subject to change without notice. © 12 2006 Alcatel. All rights reserved. 3CL 00469 0020 TQZZA Ed.12 21350
|